- Servo Motor Mold
- BMC Plastic-Envelop Motor Mould
- Over Mouding
- BMC Rotor Mould
- BMC Stator Mould
- Air Conditioner Motor Mould
- Refrigerator Motor Mould
- Washing Machine Motor Mould
- DC Motor Mold
- AC Motor Mould
- Automotive Motor Mould
- Power/Electic Tool Rotor Mould
- Hood Motor Mould
- Motor End Cap Mould
- Motor Bracket Mould
- SMC Cable Braket Moulding
- High Voltage Electrical Product Mould
- Low Voltage Electrical Appliance Mould
- Auto Parts Mould
- SMC Antenna Reflector Mould
- Insulation Mold
- Insulated Shell Mould
- Insulation Board Mould
- Shell Moulding
- Household Mould
- Flange Molding
- Frame Moulding
- BMC/SMC Motor
- SMC Cable Braket
- High-Voltage Electrical Products
- Low-Voltage Electrical Products
- Auto Parts And Accessories
- SMC/BMC Antenna Reflector
- BMC/SMC Insulation
- Insulated Shell
- SMC/BMC Insulation Board
- SMC/BMC Shell
- SMC/BMC Household Goods
- SMC/BMC Flange
- SMC/BMC Framework
- BMC, SMC, GRP, GFK Ceiling
- BMC, SMC, GRP, GFK Wall Panel
- BMC, SMC, GRP, GFK Building & Decoration Materials
- BMC, SMC, GRP, GFK Roof Tiles
In the past 10 years, Over Moulding technology has completely changed the aesthetic standards, design ideas and functional requirements of consumer goods. Medical device manufacturers also recognize t...
2019/09/29 Points for Attention in Process Design
In the process design of Over Moulding, the key elements are anti-backlash device, nozzle hole, air outlet and surface texture of mould.The anti-backlash device between the base material and the cover...
SMC BMC Molding for Energy/Power Generation
SMC products have remarkable characteristics on the insulation. The thickness of 1mm can withstand tens of thousands of volts. It can be used for insulation on the battery box of new energy vehicles. avoid a series of accidents such as electric leakage, use this material does not have to be considered for other insulation devices.
Light weight, high strength
SMC products have a specific gravity of about 1.7-1.85 and a standard of impact strength of 55KJ/m2. Therefore, the weight can be effectively reduced when the strength is satisfied. Compared with the conventional materials (cold rolled sheet and aluminum alloy), the weight can be effectively reduced by 20%-30%.
High hardness and good rigidity
SMC products have a bending strength of 150 MPa or more. The tensile strength is above 90MPa, and the Barcol hardness is above 70HBa, so it does not deform after being subjected to strong impact, which can well protect the integrity of the inner battery and avoid the possibility of explosion after impact.
SMC material products have a thermal transition temperature greater than 250°. At -50° to 250°, after alternating heat and cold, the deformation is very small, so it is stable in its harsh environment.
The SMC composite battery box produced by our company is formed by high temperature and high pressure molding process once, and its shrinkage rate is about -0.5%, also called zero shrinkage material. After molding, the dimensional accuracy is high and the flatness is good. Easy to install and standard work with high standards.
Fire prevention high performance
SMC material products contain aluminum hydroxide, silicon dioxide and other materials. After testing, the oxygen index is more than 35%, and its fire resistance and safety performance are very high.
SMC material products, because fiber reinforced polyester materials have good resistance to acid, alkali, salt, organic solvents, seawater, etc., so the chemical resistance of SMC battery cases is unmatched by other materials.
GET IN TOUCH