English
- BMC/SMC Motor
- SMC Cable Braket
- High-Voltage Electrical Products
- Low-Voltage Electrical Products
- SMC Auto Parts
- SMC/BMC Antenna Reflector
- BMC/SMC Insulation
- Insulated Shell
- SMC/BMC Insulation Board
- SMC/BMC Shell
- SMC/BMC Household Goods
- SMC/BMC Flange
- SMC/BMC Framework
- BMC, SMC, GRP, GFK Ceiling
- BMC, SMC, GRP, GFK Wall Panel
- BMC, SMC, GRP, GFK Building & Decoration Materials
- BMC, SMC, GRP, GFK Roof Tiles
- info@waiwaitree.com
- +86-15382332967
Today, I'd like to talk about the preparation of BMC moulding plastics, because BMC moulds and their products are also widespread in our life. Next, please follow Zhejiang Aobang and Technology Co., Ltd. to see about the preparation of BMC Plastic-Envelop Mould.
Characteristics of BMC Plastic-Envelop Mould
Before we talk about this topic, let's first understand the characteristics of BMC Plastic-Envelop Mould, as follows
Product characteristics:
1. Excellent electrical insulation, arc resistance and leakage resistance.
2. Excellent mechanical strength, flame retardancy and heat resistance.
3. Excellent moulding technology, low moulding pressure and short moulding time.
4. Excellent colouring property, which can produce DMCs of various colours as required.
Other Notes: Notes
1. Hard chromium is best plated on the surface of die cavity.
2. When feeding, the DMC is rubbed into a ball and added to the center of the cavity. The area is 50-80% of the projected area of the product.
3. Shaping pressure should not be too high. Excessive pressure will bring defects such as mucous membrane, inconvenient ejection, glass fiber appearance, and dull surface.
4. After using the material, tighten the bag mouth and keep it sealed.
5. The material should be kept in a cool place below 25 C for three months.
Characteristics of BMC Plastic-Envelop Mould
Before we talk about this topic, let's first understand the characteristics of BMC Plastic-Envelop Mould, as follows
Product characteristics:
1. Excellent electrical insulation, arc resistance and leakage resistance.
2. Excellent mechanical strength, flame retardancy and heat resistance.
3. Excellent moulding technology, low moulding pressure and short moulding time.
4. Excellent colouring property, which can produce DMCs of various colours as required.
Other Notes: Notes
1. Hard chromium is best plated on the surface of die cavity.
2. When feeding, the DMC is rubbed into a ball and added to the center of the cavity. The area is 50-80% of the projected area of the product.
3. Shaping pressure should not be too high. Excessive pressure will bring defects such as mucous membrane, inconvenient ejection, glass fiber appearance, and dull surface.
4. After using the material, tighten the bag mouth and keep it sealed.
5. The material should be kept in a cool place below 25 C for three months.
Related News
