Zhejiang Aobang Technology Co., Ltd.
Zhejiang Aobang Technology Co., Ltd.
Contact Us
inner banner



  • No.62 zhidailang, Sha Village, Luoshe Town, Deqing, Huzhou city, Zhejiang, China
  • info@waiwaitree.com
  • +86-15657163173

In many product lines, molding technology is a kind of molding technology that we often use. This process is to add a certain amount of molding materials (premix or prepreg, etc.) into the metal pair mold, and then heat and pressurize them for curing. It is the oldest and most active molding method in the production of composite materials.

BMC insulation is a kind of thermosetting reinforced plastics. For thermosetting plastics, the mold should be preheated to the required temperature before molding. The actual temperature is related to the type, formula, shape and wall thickness of the products, molding equipment and operating environment of the pressed BMC insulation.

Since the curing time of general BMC insulation at 150 ℃ is less than lmin / mm, the feeding should be rapid. For example, if the material is weighed manually, it is not conducive to the improvement of production efficiency due to the slow speed. Therefore, when pressing small products, the mold with a common feeding room is used.

For the products with complex shape, the materials can be pre pressed into the blank similar to the products, so as to avoid the problems of lack of materials or melting line on the protruding parts of the products.

The company's special formula can be used for injection molding. Each formula is specially customized according to your needs to perfectly meet your requirements for product performance and processing performance.


  • Automotive

    Sheet molding compound (SMC) mold can be used to manufacturing parts of cars, buses, trucks, transport and special vehicles.

    Learn More >
  • Energy/Power Generation
    Energy/Power Generation

    BMC and SMC are used to make xenon lamp HID luminaires because they can withstand the high temperatures that luminaires can withstand.

    Learn More >
  • New Energy Vehicle
    New Energy Vehicle

    Sheet molding compound (SMC) mold can be used to manufacturing parts of new energy vehicle.

    Learn More >
  • Transportation Equipment
    Transportation Equipment

    BMC and SMC are used to make outdoor large-scale transportation equipment bearing housing, bearing cover, sealing ring, non-oxidizing.

    Learn More >
  • High-speed Rail
    High-speed Rail

    The bulk molding compound (BMC) and sheet molding compound (SMC) are different from these materials.

    Learn More >
  • Building Materials
    Building Materials

    Our BMC ceiling and wallboard materials have been developed for more than ten years, and the technology is constantly being updated.

    Learn More >
  • Ship

    Sheet molding compound and bulk molding compound are widely used for Ship. Click here for more info about the SMC & BMC material.

    Learn More >
  • Electrical Appliances
    Electrical Appliances

    BMC can be used for household appliance, such as frying pan lids and brackets, as well as kitchen component materials such as oven endplates.

    Learn More >
  • Motor

    BMC plastic motor mold replaces the traditional iron shell and aluminum products, reduces the process, stronger sealing, higher safety factor, less noise.

    Learn More >
  • High And Low Voltage Electrical Switch
    High And Low Voltage Electrical Switch

    BMC & SMC is used to make parts with resistance to electrical marks greater than 600 minutes and arc resistance greater than 180 seconds.

    Learn More >
  • Outdoor Supplies
    Outdoor Supplies

    The fuel cell industry uses a large number of thermoset materials to make two plates. BMC and SMC are also suitable for use in solar tile and wind turbines.

    Learn More >