Zhejiang Aobang Technology Co., Ltd.
Zhejiang Aobang Technology Co., Ltd.
Contact Us

SMC Cable Braket Moulding

One SMC Cable Bracket Moulding accommodates three moulding parts, a cable bracket, a post and a fixed pin, which constitutes a complete SMC cable bracket. The material of the column and the pin are also made up of composite with high-temperature pultrusion process. The column moulding part can be cut at lengths according to the needs and the height of the layer can be adjusted, so it can be freely assembled. Specification of SMC Cable Bracket Moulding varies to different lengths and load requirements.

Advantage of SMC Cable Bracket Moulding


SMC Cable Bracket Moulding is recommended for light weight, high strength, aging resistance, and UV protection. More importantly, 1 mm SMC cable bracket molded out of this mould can withstand as high as above 10,000 voltages. As an electrical moulding product, this property is a supreme nature for its application. It is a highly insulated housing mould. The bracket moulding has high degree of standardization, reasonable flow channel design, small cavity pressure, balanced temperature, no handle, and low power consumption.

Application of moulding SMC Cable Bracket


  • cable trench;
  • cable tunnel;
  • shaft well;
  • cable corridor.

Classification of SMC Cable Bracket Mould


  • Combined SMC cable bracket mould
  • Buried SMC cable bracket mould
  • Screwed SMC cable bracket mould

Reason to choose SMC Cable Bracket Mould -Comparison With Galvanized Angle Bracket


Project

SMC Cable Bracket

Galvanized angle bracket

Density (g/cm3)

1.80

7.85

Specific strength

167

90

Corrosion resistance (80°/100h)

0.012

0.023

Insulation strength (kv/mm)

14.0

Conductive

Flame retardancy

meets the FH-1

--

Water resistance (%)

0.11

--

Corrosion resistance

Corrosion、acid、alkali、salt resistant

Corrosive, easy to rust

insulation

insulation

Conduction

Mechanical strength

Top force 2.5kN deflection 1.0cm

Top force 2.5kN deflection 1.2cm

Lateral force 0.5kN

Top horizontal offset 7cm

Top horizontal offset 7cm

Weight

light

weight

Eddy current effect (loss)

no

Large loss

Manufacturing process is difficult

easy

Many processes and long cycle

Cable outer sheath scraping test

No visible damage

There is a little visible damage

Raw material

Cheap, resource-rich

More expensive, partially imported

Maintenance

Free maintenance

5-7 years need to be repaired once

Installation process is difficult or easy

Short time and easy to install

Long time, difficult to install

Use life

30 years

10 years


GET IN TOUCH
GET IN TOUCH
Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.
Contact Info
Whether you have a question about product featurres, shipping, site policies or anything else, we're here to help ad ready to answer your questions.
  • Call
    +86-15657163173
  • Email
    info@waiwaitree.com
  • Address
    No.62 zhidailang, Sha Village, Luoshe Town, Deqing, Huzhou city, Zhejiang, China
Request a Free quote